Corn Cob Blasting


 

Corn2Corn Cob Blasting

Corn cob blasting is a unique way of removing existing coatings and dead wood fibers from exterior wood surfaces.  This process is recognized in the log home industry as the best and most effective way to prepare log homes for refinishing.  Cob blasting machines use compressed air together with ground up corn cob.  The corn cob is light and works very effectively to strip the wood.  The air pressure and the amount of media (corn cob) can be adjusted very precisely to only remove as much of the outer portion of the log as is necessary to remove the failing finish and outer wood fibers.  Corn cob is bio-degradable, therefore it is not only effective but safe for the surrounding environment.  It is a dry process, therefore eliminating the problems associated with power washing. Some homes have failing caulk and chink that will allow water into the home when chemical stripping is done.  Knots in the wood can also provide an avenue for water and chemicals into the home.  Since cob blasting is a dry process, the log home can then be immediately stained without waiting for the drying process.  In many parts of the country it is difficult to have more than a few consecutive dry days, when blasting you can apply the stain the same day!

Cob blasting is the best way to prepare a log surface for stain, because it opens the surface grain.  This makes it more porous, so the log will absorb more stain than a non-cob blasted log.  This equates to more UV protection and a longer lasting finish.

Contact The Stain Shop today for more information on Cob Blasting your Log or Cedar Home.

If you would like more information, simply fill out our request service information form.
 
Corn